Android Copying sample data files into sdcard partition.

Copying sample data files into sdcard partition.

Requirements for copying sample files to SD card:
1.Android sdk(software development kit).
Link to Download: http://developer.android.com/sdk/index.html
Steps:
1.Connect LAN cable to host and target machines.You should connect to RJ45 port in system.
2.Using if config cmd. Configure the manual ip address for both the machines
Cmd: ifconfig eth0 <ip address> <net mask address> up
ex: ifconfig eth0 192.168.1.15 net mask 255.255.255.0 up
3.Enter into Android sdk path
ex: e:/eclipse/android-sdk/platform-tools/
4.Using adb connect command you can connect host and target
Cmd:adb connect <ip address:port address>
ex:adb connect<192.168.1.15:5555>
Screenshot:
5.Check for connected devices.
Cmd:adb devices
as soon you type this command it will list the connect devices.
6.After connecting devices try to push the files into platform-tools folder.
7.Once the files are copied into platform-tools folder .Use adb push cmd to push the files to target.
Cmd:adb push file name /sdcard/file name..
ex:adb push abc.txt /sdcard/abc.txt